Microhidráulica Industrial

# Definitions

Absolute Viscosity is the ratio of the shear stress in a fluid to the rate of shearing strain.

• Unit of absolute viscosity in the metric system: poise and centipoise;

 1 poise = 1 gm/(cm)(sec.)

Unit of absolute viscosity in the English system:

 slug/(ft.) (sec.) ; 1 slug/(ft.)(sec.) = 478.8 poise

Kinematic Viscosity is the absolute viscosity ÷ density.

Unit of kinematic viscosity in the metric system (and commonly used in the countries using the English system): stoke and centistoke;

 1 stoke = 1 poise/density (gm/ml) 1 centistoke = 1/100 stoke

Other units of kinematic viscosity; In the English system, the most practical unit for making calculations is ft.2/sec.;

 1 ft.2/sec. = 92903 centistokes 1 centistoke = 1/076 x 10-5 ft.2/sec.

Saybolt Universal Seconds, SSU, is the kinematic viscosity as determined by the time in seconds required for 60 cc of fluid to flow
through a standard orifice.

Saybolt-Furol, SSF, utilizes a larger orifice and is used for very viscous fluids. Time of efflux is approx. 1/10 that of Universal.

Engler degrees are obtained by dividing the outflow time of a specified amount of fluid through a specified orifice by the outflow time of water
at 68°F. The method is used predominantly in European countries.

Viscosity Index is an empirical number indicating the effect of temperature change on viscosity. Fluids with the same viscosity at a given
temperature do not necessarily have the same viscosity index.

SAE Viscosity Numbers are a means of classifying crankcase lubricating oils in terms of viscosity. Other factors are not considered.

Absolute Viscosity is the ratio of the shear stress in a fluid to the rate of shearing strain.

• Unit of absolute viscosity in the metric system: poise and centipoise;

 1 poise = 1 gm/(cm)(sec.)

Unit of absolute viscosity in the English system:

 slug/(ft.) (sec.) ; 1 slug/(ft.)(sec.) = 478.8 poise

Kinematic Viscosity is the absolute viscosity ÷ density.

Unit of kinematic viscosity in the metric system (and commonly used in the countries using the English system): stoke and centistoke;

 1 stoke = 1 poise/density (gm/ml) 1 centistoke = 1/100 stoke

Other units of kinematic viscosity; In the English system, the most practical unit for making calculations is ft.2/sec.;

 1 ft.2/sec. = 92903 centistokes 1 centistoke = 1/076 x 10-5 ft.2/sec.

Saybolt Universal Seconds, SSU, is the kinematic viscosity as determined by the time in seconds required for 60 cc of fluid to flow
through a standard orifice.

Saybolt-Furol, SSF, utilizes a larger orifice and is used for very viscous fluids. Time of efflux is approx. 1/10 that of Universal.

Engler degrees are obtained by dividing the outflow time of a specified amount of fluid through a specified orifice by the outflow time of water
at 68°F. The method is used predominantly in European countries.

Viscosity Index is an empirical number indicating the effect of temperature change on viscosity. Fluids with the same viscosity at a given
temperature do not necessarily have the same viscosity index.

SAE Viscosity Numbers are a means of classifying crankcase lubricating oils in terms of viscosity. Other factors are not considered.